A drill size chart helps identify the correct drill bit diameter for drilling holes in wood, metal, plastic and other materials. Drill bits are commonly measured in fractional inches, decimal inches, millimeters, numbered sizes and letter sizes. For threaded holes, the correct tap drill size depends on the thread diameter and pitch, while screw pilot holes depend on the screw design and material.
Choosing the correct drill bit size is essential for creating accurate holes, installing screws, preparing threaded holes and completing drilling projects safely. Whether you are a DIY enthusiast, carpenter, mechanic, metalworker or professional contractor, understanding drill bit measurements can help you avoid incorrect hole sizes and damaged materials.
A drill size chart makes it easier to compare drill bit diameters across different measurement systems, including fractional inches, decimal inches, millimeters, numbered drill sizes and letter drill sizes.
The challenge is that drill bits are not available in just one standard measurement system. For example, a drill bit measuring 1/4 inch has a diameter of 6.35 mm, while a 6 mm drill bit is slightly smaller. Although the difference appears small, it can affect the fit of a screw, bolt or threaded connection.
This guide explains common drill bit sizes, provides conversion charts and covers the measurements needed for woodworking, metalworking, screw pilot holes and thread tapping.
1. What Is a Drill Size Chart?
A drill size chart is a reference table that lists drill bit diameters in different measurement systems.
It helps users identify the correct drill bit for a particular application without having to calculate measurements manually.
Most drill bit charts include some or all of the following measurement systems:
- Fractional inch sizes
- Decimal inch sizes
- Metric sizes in millimeters
- Number drill sizes
- Letter drill sizes
- Tap drill sizes
For example, if a project requires a 3/8-inch hole, a drill size chart shows that the equivalent diameter is 0.375 inches or approximately 9.525 millimeters.
Drill size charts are particularly useful when working with tools, screws, fasteners and equipment manufactured in different countries.
2. Fractional Drill Size Chart in Inches and Millimeters
Fractional drill bits are commonly used in the United States and other applications that follow inch-based measurements.
These drill bits are identified by fractions such as 1/16, 1/8, 1/4, 3/8 and 1/2 inch.
The following table provides a useful reference for common fractional drill bit sizes and their metric equivalents.
Fractional Drill Size Conversion Chart
| Drill size (fraction) | Decimal inches | Millimeters (mm) |
|---|---|---|
| 1/64″ | 0.0156 | 0.397 |
| 1/32″ | 0.0313 | 0.794 |
| 3/64″ | 0.0469 | 1.191 |
| 1/16″ | 0.0625 | 1.588 |
| 5/64″ | 0.0781 | 1.984 |
| 3/32″ | 0.0938 | 2.381 |
| 7/64″ | 0.1094 | 2.778 |
| 1/8″ | 0.1250 | 3.175 |
| 9/64″ | 0.1406 | 3.572 |
| 5/32″ | 0.1563 | 3.969 |
| 11/64″ | 0.1719 | 4.366 |
| 3/16″ | 0.1875 | 4.763 |
| 13/64″ | 0.2031 | 5.159 |
| 7/32″ | 0.2188 | 5.556 |
| 15/64″ | 0.2344 | 5.953 |
| 1/4″ | 0.2500 | 6.350 |
| 17/64″ | 0.2656 | 6.747 |
| 9/32″ | 0.2813 | 7.144 |
| 19/64″ | 0.2969 | 7.541 |
| 5/16″ | 0.3125 | 7.938 |
| 21/64″ | 0.3281 | 8.334 |
| 11/32″ | 0.3438 | 8.731 |
| 23/64″ | 0.3594 | 9.128 |
| 3/8″ | 0.3750 | 9.525 |
| 25/64″ | 0.3906 | 9.922 |
| 13/32″ | 0.4063 | 10.319 |
| 27/64″ | 0.4219 | 10.716 |
| 7/16″ | 0.4375 | 11.113 |
| 29/64″ | 0.4531 | 11.509 |
| 15/32″ | 0.4688 | 11.906 |
| 31/64″ | 0.4844 | 12.303 |
| 1/2″ | 0.5000 | 12.700 |
How to read this chart: If your project requires a 5/16-inch drill bit, look at the corresponding row. Its diameter is 0.3125 inches, which is approximately 7.938 mm.
Fractional drill sizes are useful when working with standard inch-based fasteners, woodworking projects and general workshop applications.
3. Metric Drill Size Chart in Millimeters
Metric drill bits are widely used in engineering, manufacturing, automotive repair, construction and general workshop applications.
They are measured directly in millimeters. Common metric drill sizes include 1 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm and 12 mm.
Metric Drill Bit Conversion Chart
| Metric drill size (mm) | Decimal inches | Nearest common fractional size |
|---|---|---|
| 1.0 | 0.0394 | 3/64″ |
| 1.5 | 0.0591 | 1/16″ |
| 2.0 | 0.0787 | 5/64″ |
| 2.5 | 0.0984 | 3/32″ |
| 3.0 | 0.1181 | 1/8″ |
| 3.5 | 0.1378 | 9/64″ |
| 4.0 | 0.1575 | 5/32″ |
| 4.5 | 0.1772 | 11/64″ |
| 5.0 | 0.1969 | 13/64″ |
| 5.5 | 0.2165 | 7/32″ |
| 6.0 | 0.2362 | 15/64″ |
| 6.5 | 0.2559 | 1/4″ |
| 7.0 | 0.2756 | 9/32″ |
| 7.5 | 0.2953 | 19/64″ |
| 8.0 | 0.3150 | 5/16″ |
| 8.5 | 0.3346 | 11/32″ |
| 9.0 | 0.3543 | 23/64″ |
| 9.5 | 0.3740 | 3/8″ |
| 10.0 | 0.3937 | 25/64″ |
| 10.5 | 0.4134 | 13/32″ |
| 11.0 | 0.4331 | 7/16″ |
| 11.5 | 0.4528 | 29/64″ |
| 12.0 | 0.4724 | 15/32″ |
| 12.5 | 0.4921 | 31/64″ |
| 13.0 | 0.5118 | 33/64″ |
| 14.0 | 0.5512 | 35/64″ |
| 15.0 | 0.5906 | 19/32″ |
| 16.0 | 0.6299 | 5/8″ |
| 18.0 | 0.7087 | 23/32″ |
| 20.0 | 0.7874 | 25/32″ |
Note: Fractional sizes are approximate equivalents, not necessarily exact replacements. For precision work, use the specified metric diameter.
Why Are Metric Drill Bits Important?
Metric drill bits are particularly useful for projects involving metric fasteners and engineering specifications.
For example:
- A 5 mm drill bit creates a nominal 5 mm diameter hole.
- A 6 mm drill bit is commonly used for certain 6 mm clearance or pilot-hole applications, depending on the required fit.
- An 8.5 mm drill bit is commonly used as a tap drill for an M10 × 1.5 thread.
- A 10.2 mm drill bit is commonly used as a tap drill for an M12 × 1.75 thread.
It is important to distinguish between the diameter of a fastener, the diameter of a clearance hole and the diameter of a tap-drill hole. They serve different purposes.
4. Number Drill Size Chart (#1 to #80)
Number drill bits are commonly used in machining, metalworking and precision drilling.
Instead of displaying their diameters as fractions, these drill bits are identified using numbers.
The numbering system works in reverse: smaller numbers generally represent larger drill diameters, while larger numbers represent smaller diameters.
For example, a #1 drill bit is larger than a #20 drill bit.
Number Drill Size Conversion Chart
| Number size | Decimal inches | Diameter (mm) |
|---|---|---|
| #1 | 0.2280 | 5.791 |
| #2 | 0.2210 | 5.613 |
| #3 | 0.2130 | 5.410 |
| #4 | 0.2090 | 5.309 |
| #5 | 0.2055 | 5.220 |
| #6 | 0.2040 | 5.182 |
| #7 | 0.2010 | 5.105 |
| #8 | 0.1990 | 5.055 |
| #9 | 0.1960 | 4.978 |
| #10 | 0.1935 | 4.915 |
| #11 | 0.1910 | 4.851 |
| #12 | 0.1890 | 4.801 |
| #13 | 0.1850 | 4.699 |
| #14 | 0.1820 | 4.623 |
| #15 | 0.1800 | 4.572 |
| #16 | 0.1770 | 4.496 |
| #17 | 0.1730 | 4.394 |
| #18 | 0.1695 | 4.305 |
| #19 | 0.1660 | 4.216 |
| #20 | 0.1610 | 4.089 |
| #21 | 0.1590 | 4.039 |
| #22 | 0.1570 | 3.988 |
| #23 | 0.1540 | 3.912 |
| #24 | 0.1520 | 3.861 |
| #25 | 0.1495 | 3.797 |
| #26 | 0.1470 | 3.734 |
| #27 | 0.1440 | 3.658 |
| #28 | 0.1405 | 3.569 |
| #29 | 0.1360 | 3.454 |
| #30 | 0.1285 | 3.264 |
| #31 | 0.1200 | 3.048 |
| #32 | 0.1160 | 2.946 |
| #33 | 0.1130 | 2.870 |
| #34 | 0.1110 | 2.819 |
| #35 | 0.1100 | 2.794 |
| #36 | 0.1065 | 2.705 |
| #37 | 0.1040 | 2.642 |
| #38 | 0.1015 | 2.578 |
| #39 | 0.0995 | 2.527 |
| #40 | 0.0980 | 2.489 |
| #41 | 0.0960 | 2.438 |
| #42 | 0.0935 | 2.375 |
| #43 | 0.0890 | 2.261 |
| #44 | 0.0860 | 2.184 |
| #45 | 0.0820 | 2.083 |
| #46 | 0.0810 | 2.057 |
| #47 | 0.0785 | 1.994 |
| #48 | 0.0760 | 1.930 |
| #49 | 0.0730 | 1.854 |
| #50 | 0.0700 | 1.778 |
| #51 | 0.0670 | 1.702 |
| #52 | 0.0635 | 1.613 |
| #53 | 0.0595 | 1.511 |
| #54 | 0.0550 | 1.397 |
| #55 | 0.0520 | 1.321 |
| #56 | 0.0465 | 1.181 |
| #57 | 0.0430 | 1.092 |
| #58 | 0.0420 | 1.067 |
| #59 | 0.0410 | 1.041 |
| #60 | 0.0400 | 1.016 |
| #61 | 0.0390 | 0.991 |
| #62 | 0.0380 | 0.965 |
| #63 | 0.0370 | 0.940 |
| #64 | 0.0360 | 0.914 |
| #65 | 0.0350 | 0.889 |
| #66 | 0.0330 | 0.838 |
| #67 | 0.0320 | 0.813 |
| #68 | 0.0310 | 0.787 |
| #69 | 0.0292 | 0.742 |
| #70 | 0.0280 | 0.711 |
| #71 | 0.0260 | 0.660 |
| #72 | 0.0250 | 0.635 |
| #73 | 0.0240 | 0.610 |
| #74 | 0.0225 | 0.571 |
| #75 | 0.0210 | 0.533 |
| #76 | 0.0200 | 0.508 |
| #77 | 0.0180 | 0.457 |
| #78 | 0.0160 | 0.406 |
| #79 | 0.0145 | 0.368 |
| #80 | 0.0135 | 0.343 |
How Does the Number Drill System Work?
The number drill system is particularly useful when working with small fasteners, machine screws and threaded holes.
For example:
- A #7 drill measures 0.201 inches.
- A #21 drill measures 0.159 inches.
- A #29 drill measures 0.136 inches.
- A #43 drill measures 0.089 inches.
- A #50 drill measures 0.070 inches.
These sizes frequently appear in tap drill charts and machining reference tables.
Important: Do not assume that a larger number means a larger hole. The number drill system works in the opposite direction.
5. Letter Drill Size Chart (A to Z)
Letter drill bits use alphabetic labels from A through Z.
They are useful when a required diameter falls between common fractional or numbered drill sizes.
For example, a letter F drill measures 0.257 inches, making it useful for certain tapping applications.
Letter Drill Size Conversion Chart
| Letter size | Decimal inches | Diameter (mm) |
|---|---|---|
| A | 0.234 | 5.944 |
| B | 0.238 | 6.045 |
| C | 0.242 | 6.147 |
| D | 0.246 | 6.248 |
| E | 0.250 | 6.350 |
| F | 0.257 | 6.528 |
| G | 0.261 | 6.629 |
| H | 0.266 | 6.756 |
| I | 0.272 | 6.909 |
| J | 0.277 | 7.036 |
| K | 0.281 | 7.137 |
| L | 0.290 | 7.366 |
| M | 0.295 | 7.493 |
| N | 0.302 | 7.671 |
| O | 0.316 | 8.026 |
| P | 0.323 | 8.204 |
| Q | 0.332 | 8.433 |
| R | 0.339 | 8.611 |
| S | 0.348 | 8.839 |
| T | 0.358 | 9.093 |
| U | 0.368 | 9.347 |
| V | 0.377 | 9.576 |
| W | 0.386 | 9.804 |
| X | 0.397 | 10.084 |
| Y | 0.404 | 10.262 |
| Z | 0.413 | 10.490 |
When Should You Use Letter Drill Bits?
Letter drill bits are useful when:
- A fractional drill bit is slightly too large or too small.
- A machining specification requires a specific diameter.
- You are preparing holes for certain threaded fasteners.
- You need more precise size selection between standard fractional measurements.
For example, a 1/4-inch drill bit and an E-size drill bit have the same nominal diameter of 0.250 inches.
A letter F drill is slightly larger at 0.257 inches.
6. Tap Drill Size Chart for Metric Threads
A tap drill is used to create a hole before cutting internal threads with a tap.
For example, if you want to create an M6 × 1.0 threaded hole, you generally drill a 5 mm hole before using the appropriate M6 × 1.0 cutting tap.
The first number represents the nominal thread diameter, while the second number represents the thread pitch.
In an M6 × 1.0 thread:
- M6 = 6 mm nominal diameter.
- 1.0 = 1 mm distance between adjacent thread peaks.
- 5 mm = commonly used tap drill diameter.
Metric Tap Drill Chart
| Thread size | Thread pitch | Recommended tap drill |
|---|---|---|
| M3 × 0.5 | 0.5 mm | 2.5 mm |
| M4 × 0.7 | 0.7 mm | 3.3 mm |
| M5 × 0.8 | 0.8 mm | 4.2 mm |
| M6 × 1.0 | 1.0 mm | 5.0 mm |
| M8 × 1.25 | 1.25 mm | 6.8 mm |
| M10 × 1.5 | 1.5 mm | 8.5 mm |
| M12 × 1.75 | 1.75 mm | 10.2 mm |
| M14 × 2.0 | 2.0 mm | 12.0 mm |
| M16 × 2.0 | 2.0 mm | 14.0 mm |
| M18 × 2.5 | 2.5 mm | 15.5 mm |
| M20 × 2.5 | 2.5 mm | 17.5 mm |
| M22 × 2.5 | 2.5 mm | 19.5 mm |
| M24 × 3.0 | 3.0 mm | 21.0 mm |
These are commonly used coarse-thread cutting-tap sizes. Fine-pitch threads require different drill diameters. Always confirm the exact thread specification and tap manufacturer’s recommendations.
How to Calculate a Metric Tap Drill Size
A commonly used approximation for metric cutting taps is:
\[ \text{Tap drill diameter} = \text{Major diameter} – \text{Thread pitch} \]
For an M8 × 1.25 thread:
\[ 8 – 1.25 = 6.75\text{ mm} \]
A commonly selected standard drill size is 6.8 mm.
This formula is a practical starting point, not a substitute for an engineering tap-drill chart. The appropriate hole diameter also depends on the required thread engagement, material and tapping method.
7. Tap Drill Size Chart for UNC and UNF Threads
In the United States, threaded fasteners commonly use Unified National Coarse (UNC) and Unified National Fine (UNF) thread systems.
The main difference is thread pitch.
- UNC threads have fewer threads per inch and a coarser pitch.
- UNF threads have more threads per inch and a finer pitch.
A correct tap drill is important because the drilled hole determines how much material remains available for forming the internal thread.
Common UNC and UNF Tap Drill Sizes
| Thread size | Thread type | Tap drill size |
|---|---|---|
| #4-40 | UNC | #43 |
| #6-32 | UNC | #36 |
| #8-32 | UNC | #29 |
| #10-24 | UNC | #25 |
| #10-32 | UNF | #21 |
| 1/4″-20 | UNC | #7 |
| 1/4″-28 | UNF | #3 |
| 5/16″-18 | UNC | F |
| 5/16″-24 | UNF | I |
| 3/8″-16 | UNC | 5/16″ |
| 3/8″-24 | UNF | Q |
| 1/2″-13 | UNC | 27/64″ |
| 1/2″-20 | UNF | 29/64″ |
These are common approximate tap drill selections for cutting taps, generally targeting around 75% thread engagement. Actual recommendations can vary with material, tap design and required thread strength.
What Is the Difference Between a Tap Drill and a Clearance Drill?
These two drill sizes are used for different purposes.
Tap drill: Creates a smaller hole into which internal threads are cut.
Clearance drill: Creates a hole large enough for a bolt or screw to pass through without cutting threads in that material.
For example, an M8 tapped hole commonly starts with a 6.8 mm drill. An M8 clearance hole is larger, with its exact diameter depending on whether a close, normal or loose fit is required.
Do not use a tap drill chart when you actually need a clearance hole.
8. Screw Pilot Hole Drill Size Chart
Pilot holes are small holes drilled before installing screws.
They help guide the screw, reduce splitting in wood and make screw installation easier.
The correct pilot hole diameter depends on the screw’s core diameter, thread design, material density and installation requirements.
General Wood Screw Pilot Hole Guidance
| Screw type | Typical pilot hole approach |
|---|---|
| Small wood screw | Use a pilot hole close to the screw’s core diameter |
| Medium wood screw | Match the pilot hole to the screw core and wood density |
| Large wood screw | Use an appropriately sized pilot hole to reduce splitting |
| Hardwoods | Pilot holes are especially important |
| Softwoods | Pilot holes may be smaller or sometimes unnecessary, depending on the screw |
Why Are Pilot Holes Important?
Pilot holes provide several benefits:
- Reduce the chance of splitting wood.
- Help screws enter at the correct angle.
- Reduce installation resistance.
- Minimize the risk of damaging screw heads.
- Improve consistency when installing multiple fasteners.
For accurate sizing, check the screw manufacturer’s pilot-hole recommendations. Do not assume every screw with the same nominal diameter needs the same pilot hole.
9. How to Convert Drill Bit Sizes from Inches to Millimeters
Converting drill bit measurements between inches and millimeters is straightforward.
The internationally defined relationship is:
\[ 1\text{ inch} = 25.4\text{ mm} \]
To convert inches into millimeters, multiply the inch measurement by 25.4.
To convert millimeters into inches, divide the millimeter measurement by 25.4.
Inch-to-Millimeter Conversion Examples
| Inch measurement | Calculation | Metric equivalent |
|---|---|---|
| 1/8″ | 0.125 × 25.4 | 3.175 mm |
| 1/4″ | 0.250 × 25.4 | 6.350 mm |
| 3/8″ | 0.375 × 25.4 | 9.525 mm |
| 1/2″ | 0.500 × 25.4 | 12.700 mm |
| 5/8″ | 0.625 × 25.4 | 15.875 mm |
| 3/4″ | 0.750 × 25.4 | 19.050 mm |
| 1″ | 1.000 × 25.4 | 25.400 mm |
Millimeter-to-Inch Conversion Examples
| Metric measurement | Calculation | Inch equivalent |
|---|---|---|
| 3 mm | 3 ÷ 25.4 | 0.1181″ |
| 4 mm | 4 ÷ 25.4 | 0.1575″ |
| 5 mm | 5 ÷ 25.4 | 0.1969″ |
| 6 mm | 6 ÷ 25.4 | 0.2362″ |
| 8 mm | 8 ÷ 25.4 | 0.3150″ |
| 10 mm | 10 ÷ 25.4 | 0.3937″ |
| 12 mm | 12 ÷ 25.4 | 0.4724″ |
| 20 mm | 20 ÷ 25.4 | 0.7874″ |
Important: A converted size may not correspond to an available standard drill bit. Always select the nearest suitable actual drill size when an exact size is unavailable, and verify the tolerance requirements of your project.
10. How to Choose the Correct Drill Bit for Different Materials
Different materials require different drill bit designs and drilling techniques.
Selecting the right diameter is only one part of the process.
Drilling into Wood
manomano.fr
Wood is generally easier to drill than metal, but the type of wood and the required hole quality matter.
Common drill bit options include:
- Brad-point bits for accurate holes.
- Twist drill bits for general-purpose drilling.
- Spade bits for larger holes.
- Forstner bits for flat-bottomed holes.
When installing screws, use a suitable pilot hole, especially in hardwood or near the edge of a board.
Drilling into Metal
hilti.pl
Metal drilling requires appropriate drill bit materials and cutting conditions.
Common options include:
- High-speed steel (HSS) drill bits.
- Cobalt-alloy drill bits.
- Carbide drill bits for suitable machine applications.
Use a suitable cutting speed and lubricant where appropriate. Secure the workpiece before drilling.
For precision holes, a drilled hole may require additional finishing with a reamer.
Drilling into Concrete and Masonry
ultratouch.co.in
Concrete and masonry generally require specialized masonry bits.
Common options include carbide-tipped masonry bits and compatible hammer-drill systems.
The hole size should match the manufacturer’s specifications for the intended masonry anchor or fastener.
Drilling into Plastic
plexiglas.de
Plastic materials can crack, melt or deform if drilled incorrectly.
Use a suitable sharp drill bit, moderate drilling speed and controlled pressure. Support the material to reduce vibration and breakout.
For acrylic and other brittle plastics, the recommended drill geometry and technique may differ from those used for ordinary wood or metal.
11. Common Drill Bit Types and Their Applications
Understanding drill bit types helps ensure that you choose a suitable tool for the job.
| Drill bit type | Common application |
|---|---|
| Twist drill bit | General-purpose drilling |
| Brad-point drill bit | Accurate woodworking holes |
| Spade drill bit | Larger holes in wood |
| Forstner drill bit | Flat-bottomed woodworking holes |
| Masonry drill bit | Brick, concrete and masonry |
| Cobalt drill bit | Suitable metalworking applications |
| Step drill bit | Enlarging holes in sheet materials |
| Countersink bit | Preparing recesses for screw heads |
| Hole saw | Large-diameter holes in suitable materials |
Not every drill bit is suitable for every material. Always check the tool manufacturer’s instructions before use.
12. Common Mistakes to Avoid When Using a Drill Size Chart
Even experienced users can make mistakes when selecting drill bit sizes.
The following issues are worth checking before starting a project.
Mistake 1: Confusing Inches with Millimeters
A 1/4-inch drill bit measures 6.35 mm, not 6 mm.
Using a 6 mm bit when a 1/4-inch hole is specified creates a smaller hole.
Mistake 2: Mixing Up Number Drill Sizes
Number drill sizes run in reverse order.
A #1 bit is larger than a #20 bit. Always verify the decimal diameter before selecting a numbered drill.
Mistake 3: Using a Tap Drill for a Clearance Hole
A tap drill creates a hole for cutting internal threads.
A clearance drill creates a hole that allows a fastener to pass through.
Using the wrong chart can result in an incorrectly sized hole.
Mistake 4: Ignoring Thread Pitch
An M8 × 1.0 thread and an M8 × 1.25 thread have the same nominal diameter but different pitches.
Their tap drill requirements are different.
Always identify both the thread diameter and pitch.
Mistake 5: Assuming the Drill Produces an Exact Hole
The actual hole diameter may differ slightly from the drill’s nominal diameter because of tool condition, runout, material properties and drilling technique.
For precision engineering applications, measure the finished hole using an appropriate measuring instrument.
Mistake 6: Selecting the Wrong Drill Bit for the Material
A standard woodworking bit is not necessarily appropriate for drilling steel or concrete.
Choose a drill bit specifically designed for the material and application.
13. Safety Tips When Drilling
Correct drill sizing is important, but safe drilling practices are equally necessary.
Follow these basic precautions:
- Wear appropriate eye protection.
- Secure the workpiece before drilling.
- Use the correct drill bit for the material.
- Check that the bit is properly installed.
- Keep hands away from the rotating bit.
- Use appropriate cutting fluid when required.
- Avoid excessive pressure.
- Allow the drill to stop completely before removing the bit.
- Follow the drill manufacturer’s safety instructions.
For metalworking, be particularly careful with hot chips and sharp metal edges. Never attempt to remove tangled chips by hand while the drill is running.
14. Frequently Asked Questions About Drill Bit Sizes
Q1. What is a drill size chart?
A drill size chart is a reference table that shows drill bit diameters in different measurement systems, including fractional inches, decimal inches, millimeters, number sizes and letter sizes. It helps users select the correct drill bit for a particular project.
Q2. What size is a 1/4-inch drill bit in mm?
A 1/4-inch drill bit measures exactly 6.35 mm in diameter. It is commonly used in woodworking, metalworking and general drilling applications.
Q3. What size drill bit is 6 mm in inches?
A 6 mm drill bit measures approximately 0.2362 inches. Its nearest common fractional drill size is 15/64 inch, which measures approximately 5.953 mm.
Q4. What is the difference between fractional and metric drill bits?
Fractional drill bits are measured in inches and identified by fractions such as 1/8, 1/4 and 3/8 inch. Metric drill bits are measured directly in millimeters, such as 3 mm, 6 mm and 10 mm.
Q5. What do numbers like #7, #29 and #43 mean on drill bits?
These numbers identify drill bit sizes in the number drill system. Each number corresponds to a specific diameter. For example, a #7 drill measures 0.201 inches, while a #29 drill measures 0.136 inches.
Q6. What is a letter drill bit?
A letter drill bit is identified by an alphabetic designation from A to Z. Each letter represents a particular diameter. Letter drill bits are useful when a specific hole size falls between common fractional drill sizes.
Q7. What size drill bit do I need for an M6 tap?
For a standard M6 × 1.0 coarse thread using a cutting tap, a 5 mm drill bit is commonly recommended. Fine-pitch M6 threads require different drill sizes.
Q8. What size drill bit do I need for a 1/4-20 tap?
A #7 drill bit, measuring 0.201 inches, is commonly used for a 1/4-20 UNC cutting tap at approximately 75% thread engagement.
Q9. Are drill bit sizes universal?
Drill bit diameters are standardized within established sizing systems, but not every measurement system uses the same designations. Fractional, metric, number and letter drill sizes each have their own conventions.
Q10. How do I measure a drill bit size?
You can measure a drill bit’s diameter using a digital caliper or micrometer. Measure across the cutting diameter rather than the shank. Compare the measurement with a drill size chart to identify its nominal size.
Q11. What is the most common drill bit size?
Commonly used drill bit sizes include 1/8 inch, 3/16 inch, 1/4 inch, 3/8 inch and 1/2 inch. Metric workshops frequently use 3 mm, 4 mm, 5 mm, 6 mm, 8 mm and 10 mm bits.
Q12. What is the difference between a tap drill and a pilot drill?
A tap drill prepares a hole for cutting internal threads. A pilot drill is a smaller guiding hole that helps position a larger drill bit or prepare a hole for a screw. Their purposes and required diameters are different.



